The EMX4i is an advanced smart soft starter designed for in-line installation. It features internal bypass and has a frame size of S3 with an IP00 rating. The current ratings vary depending on the load, with light at 1230 Amp, medium at 1154 Amp, heavy at 959 Amp and severe at 794 Amp. The supply voltage range for the EMX4i is 200-525 Volt AC, while the control voltage is 110/240 Volt AC. This smart soft starter offers a wide range of motor control features including constant current and current ramp start, coast to stop and TVR stop, XLR-8 adaptive control starting/stopping, DC brake, soft brake, kickstart, soft trip, jog (forward and reverse) and inside delta (6 wire) control. In terms of motor protection, the EMX4i provides protection against motor thermistor faults, current imbalance, under/over current conditions, phase sequence issues, phase loss and power loss. It also includes emergency run mode and run simulation with real-time performance graphs. For simplified management, the EMX4i offers SCR fail power through operation and daily on/off scheduling. Additionally, it can support an I/O smart card or communication expansion card with a remote keypad connector. Alternatively, it can be used with a dedicated keypad connector card for advanced functionality. The EMX4i also includes a USB port for easy parameter upload and download as well as data logging capabilities.