The EMX4i is an advanced smart soft starter designed for in-line installation. It features internal bypass and has a frame size of S2 with an IP00 rating. The current ratings vary depending on the load, with light at 580 Amp, medium at 578 Amp, heavy at 469 Amp and severe at 369 Amp. The supply voltage range is between 200-525 Volt AC, while the control voltage is 24 Volt AC/DC. This soft starter offers various motor control features including constant current and current ramp start, coast to stop and TVR stop, XLR-8 adaptive control starting/stopping, DC brake, soft brake, kickstart, soft trip, jog (forward and reverse) and inside delta (6 wire) control. It also provides motor protection for motor thermistor, current imbalance, under/over current, phase sequence, phase loss and power loss. For simplified management, the EMX4i includes emergency run mode and run simulation with real-time performance graphs. It also has SCR fail power through operation and daily on/off scheduling capabilities. The EMX4i can be enhanced with additional functionality through the use of an I/O smart card or a communication expansion card with a remote keypad connector. Alternatively, it can be equipped with a dedicated keypad connector card. Additionally, it offers a USB port for easy parameter upload and download along with data logging capabilities.