id: 6811f81420d3d420caa4a65f
description: These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring/fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. Partition/Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.
id: 6811f81420d3d420caa4a65f
description: These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring/fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. Partition/Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.
id: 6811f81420d3d420caa4a65f
description: These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring/fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. Partition/Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.
id: 6811f81420d3d420caa4a65f
description: These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring/fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. Partition/Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.
id: 6811f81420d3d420caa4a65f
description: These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring/fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. Partition/Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.
id: 6811f81420d3d420caa4a65f
description: These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring/fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. Partition/Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.
id: 6811f81420d3d420caa4a65f
description: These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring/fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. Partition/Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.
id: 6811f81420d3d420caa4a65f
description: These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring/fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. Partition/Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.
id: 6811f81420d3d420caa4a65f
description: These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring/fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. Partition/Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.
id: 6811f81420d3d420caa4a65f
description: These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring/fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. Partition/Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.
id: 6811f81420d3d420caa4a65f
description: These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring/fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. Partition/Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.
id: 6811f81420d3d420caa4a65f
description: These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring/fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. Partition/Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.
id: 6811f81420d3d420caa4a65f
description: These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring/fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. Partition/Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.
id: 6811f81420d3d420caa4a65f
description: These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring/fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. Partition/Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.